压缩机培训系统学员可亲自使用KR-105对压缩机回路进行接线。本培训系统提供电流模式和PTC两种启动方式。通过测量和观察启动电路端子上的信号，了解启动电路的工作原理。此外，教练机还包括一个真正的制冷系统。因此，当接线完成时，启动电路可以驱动真正的压缩机。高/低压力表和电压/电流表嵌入前面板。系统中的铜管有预留孔供用户测量温度。系统中的每个部件都是单独固定的。采用透明丙烯酸盖，可保护部件，使学员清晰观察部件结构。蒸发器和冷凝器上分别安装两个风机，调节蒸发和冷凝条件，使实验多样化。 1. Operating principle and structure of compressor 2. In-Circuit component testing 3. PTC Start-Up practice 4. Current-mode Start-Up practice 5. Overview of the system 6. Circulation of refrigeration system 7. Management of refrigeration system 8. Circulation of refrigeration system practice 9. Drawing mollier diagram 10. Evaluation and comparison of refrigeration performance The components’ structure is able to be observed clearly, and protected by transparent acrylic cover. Two start-up methods are included (current-mode and PTC). Quick connectors are used in each component for easy wiring. A real circulation of refrigeration system is included for users’ observation and analysis. Several apertures are reserved for users to measure the temperature easily. A fan with standalone switch is installed on the evaporator for users to adjust heat absorption of the evaporator. A fan with standalone switch is installed on the condenser for users to adjust heat dissipation of the condenser. High / Low pressure gauges are embedded in front panel and connected with the compressor for observing the pressure change. Trainees can use the fixed valve to practice the refrigerant supplement.

Ltekonline是压缩机培训系统的制造商，用于演示工程学院，工程学校和工程原理制冷/空调设备大学工程教学实验室